|
 |
 |
 |
 |
| Bike Model and Fairing Fitment Guides |
|
  |
|
 |
|
|
|
 |
|
|
|
- Systems
- Amplifiers
- Speakers
- Accessories
- Radio Install
- Tweeter Kits
 DCS System Harley-Davidson Applications
| Stock 1998-Newer Harley-Davidson speakers utilize 2 ohm or 8 ohm voice coils. Due to the 4 ohm speaker output of the DCS amplifier (and most other aftermarket amplifiers), they should not be connected directly to stock speakers. Failure to follow this guideline can cause damage to your amplifier and/or speakers, and void your warranty. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Victory Vision |
| 2007-2013 |
| Street, Street Premium, Tour, Tour Comfort, Tour Premium |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Note: Requires Harley-Davidson Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Note: Requires Harley-Davidson VENTED lower fairing and glove boxes. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Note: Requires Harley-Davidson Hard Saddle Bags. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Note: Requires Harley-Davidson 6.5" Lower Fairings and Hard Saddle Bags. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
DCS/CS/RS Series Harley-Davidson Applications
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1996-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Custom fairing mounting locations and fitment may vary, and must be test fit on a one-by-one basis. |
| Manufacturer |
Fairing Model |
| Harley-Davidson® |
Sharknose Fairing (Road Glide) |
| Harley-Davidson® |
Batwing Fairing (Electra Glide, Street Glide) |
| Hoppe Industries |
Quadzilla Fairing |
| Dragonfly Cycle Concepts |
Custom Fairing |
| Dead Center Cycles |
Custom Fairing |
RX502-50 Harley-Davidson Applications
| Stock 2006-Newer Harman/Kardon / Harley-Davidson radios utilize 2 ohm speaker outputs. These speakers are designed to replace 2006-Newer factory speakers only. They should never be connected to any of our 4 ohm amplifiers. Failure to follow this guideline can damage your speakers and void your warranty. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
2006-2013 |
2006-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Stock 1998-2005 Harley-Davidson radios utilize 8 ohm speaker outputs. These speakers are designed to replace 1998-2005 factory speakers only. They should not be connected to any of our 4 ohm amplifiers. Failure to follow this guideline can damage your speakers and void your warranty. |
| Street Glide |
Road Glide |
Electra Glide |
| - |
1998-2005 |
1998-2005 |
| |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU |
| Stock 2006-Newer Harman/Kardon / Harley-Davidson radios utilize 2 ohm speaker outputs. These speakers are designed to replace 2006-Newer factory speakers only. They should never be connected to any of our 4 ohm amplifiers. Failure to follow this guideline can damage your speakers and void your warranty. Not for use in Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
2006-2013 |
2006-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Recommended for 4 ohm amplifiers and aftermarket source units only. Stock 1998-Newer Harley-Davidson radios utilize 2 or 8 ohm speaker outputs (excluding some CVO radios). Due to the 4 ohm voice coils in these speakers, they should not be connected directly to the stock radio speaker outputs. Failure to follow this guideline can damage your radio and void your warranty. Not for use in Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Victory Vision |
| 2007-2013 |
| Street, Street Premium, Tour, Tour Comfort, Tour Premium |
| Recommended for 4 ohm amplifiers and aftermarket source units only. Stock 1998-Newer Harley-Davidson radios utilize 2 or 8 ohm speaker outputs (excluding some CVO radios). Due to the 4 ohm voice coils in these speakers, they should not be connected directly to the stock radio speaker outputs. Failure to follow this guideline can damage your radio and void your warranty. Not for use in Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Recommended for 4 ohm amplifiers and aftermarket source units only. Stock 1998-Newer Harley-Davidson radios utilize 2 or 8 ohm speaker outputs (excluding some CVO radios). Due to the 4 ohm voice coils in these speakers, they should not be connected directly to the stock radio speaker outputs. Failure to follow this guideline can damage your radio and void your warranty. Not for use in Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| This information is intended for reference only, and doesn't necessarily cover all available options. |
| Year |
OEM |
Description |
Specifications |
| 1996-1997 |
Radio Sound |
H-D Radio/Tape |
2CH @ 4 ohm |
| 1998-2003 |
Radio Sound |
H-D Radio/Tape |
2CH @ 8 ohm |
| 1998-2003 |
Radio Sound |
H-D Ultra Radio/Tape |
4CH @ 8 ohm |
| 2004-2005 |
Radio Sound |
H-D Radio/CD |
2CH @ 8 ohm |
| 2004-2005 |
Radio Sound |
H-D Ultra Radio/CD |
4CH @ 8 ohm |
| 2004-2005 |
Radio Sound |
H-D CVO Radio/CD |
2CH @ 8 ohm
2CH @ 4 ohm |
| 1998-2005 |
Radio Sound |
H-D Add-On Tour-Pak Amplifier |
2CH @ 8 ohm |
| 1998-2005 |
Radio Sound |
H-D Ultra Tour-Pak Amplifier |
4CH @ 4 ohm |
| 2006-2013 |
Harman/Kardon |
H-D Radio/CD |
4CH @ 2 ohm |
| 2006-2013 |
Harman/Kardon |
H-D Tour-Pak Amplifier |
4CH @ 2 ohm |
| 2003-2012 |
Hawg Wired |
All Amplifier Systems |
2CH/4CH @ 4 ohm |
| Stock 2006-Newer Harley-Davidson radios utilize 2 ohm speaker outputs. These speakers are designed to replace 2006-Newer factory speakers only. They should never be connected to any of our 4 ohm amplifiers. Failure to follow this guideline can damage your speakers and void your warranty. Not for use in Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2019 |
2006-2019 |
2006-2019 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Recommended for 4 ohm amplifiers and aftermarket source units only. Stock 1998-Newer Harley-Davidson radios utilize 2 or 8 ohm speaker outputs (excluding some CVO radios). Due to the 4 ohm voice coils in these speakers, they should not be connected directly to the stock radio speaker outputs. Failure to follow this guideline can damage your radio and void your warranty. Not for use in Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2019 |
1998-2019 |
1998-2019 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| These speakers and adapters are designed for 5.25" speaker openings in Sharknose fairings. Not for use on Batwing fairings or Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| - |
1998-2013 |
- |
| |
FLTR, FLTRSE |
|
| These NX Series Speakers come with Adapter rings and adapter brackets that are intended to retain the OE fairing braces when installing our 6.5" speakers and adapters on Batwing fairings. Not for use on Sharknose fairings. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
- |
1996-2013 |
| FLHX |
|
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
AR65 Harley-Davidson Applications
| These adapter rings are designed to fit OEM Batwing (FLHT/X) and Sharknose (FLTR) inner fairings. Use of the included spacer is only required on Batwing (FLHT/X) fairings. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1998-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| These speaker adapter brackets are intended to retain the OE fairing braces when installing our 6.5" speakers and adapters on Batwing fairings. Not for use on Sharknose fairings. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
- |
1996-2013 |
| FLHX |
|
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| For use with H-D lower fairing Part# 58830-88***. Fits Hawg Wired DX or SX Series speakers only. |
| Street Glide |
Road Glide |
Electra Glide |
Road King |
| 2006-2010 |
- |
1983-2010 |
1995-2010 |
| FLHX |
|
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
FLHR, FLHRS, FLHRC, FLHRSE |
| For use with Harley-Davidson VENTED lower fairing Part# 58854-05***. |
| Street Glide |
Road Glide |
Electra Glide |
Road King |
| 2006-2013 |
2013 |
1988-2013 |
1995-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
FLHR, FLHRS, FLHRC, FLHRSE |
| These grills are designed for 5.25" speaker openings in Batwing fairings. Not for use on Sharknose fairings or Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
- |
1996-2013 |
| FLHX |
|
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| These grills are designed for 5.25" speaker openings in Sharknose fairings. Not for use on Batwing fairings or Tour-Pak speaker pods. |
| Street Glide |
Road Glide |
Electra Glide |
| - |
1998-2013 |
- |
| |
FLTR, FLTRSE |
|
| This adapter harness is designed for 1996-1997 radio harnesses only. It is not needed for 1998-Newer bikes. |
| Street Glide |
Road (Ultra) Glide |
Electra Glide |
| - |
1996-1997 |
1996-1997 |
| |
FLTC, FLTCU |
FLHT, FLHTC, FLHTCU |
| This adapter harness fits factory Harman/Kardon source unit auxiliary connectors only. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
2006-2013 |
2006-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Fits factory Harman/Kardon source units only. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
- |
2006-2013 |
| FLHX |
|
FLHT, FLHTC, FLHTCU, FLHTCUSE |
| Designed for use with Harley-Davidson batwing fairing. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
- |
1998-2013 |
| FLHX |
|
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Street Glide |
Road Glide |
Electra Glide |
| - |
1998-2013 |
- |
| |
FLTR, FLTRSE |
|
| This adapter harness fits factory 2 Channel amplifiers only. |
| FLHXSE |
FLTR*SE |
FLHTCUSE |
| 2011-2012 |
2012-2013 |
- |
|
|
|
DS235B Harley-Davidson Applications
| Designed for use with Harley-Davidson Batwing (FLHT/X) fairings only. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
- |
1998-2013 |
| FLHX |
|
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1996-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| The HUA360 Adapter is plug and play compatible with the following factory harness connectors: |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1996-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Note: 1996-1997 requires adapter harness WHA9697. |
| Note: The HUA360 Adapter is designed for aftermarket source units that feature a 3.5mm jack or single wire input for STEERING WHEEL CONTROLS. The following brands of radios that support STEERING WHEEL CONTROLS are assumed* compatible source units. |
| *Since testing each source unit model from each manufacturer listed is impossible, assumed compatibility is based on manufacturer specifications available at the time this information was gathered. Each brand of communication protocol was developed and tested using one or more source unit models from each manufacturer. |
|
| *Some brands of radios not listed above have been found to be cross-compatible with some of the brands we do support (eg. Dual, Jensen, etc.). While we can't guarantee functionality, there's a good chance that cross-compatible brands will work. |
GTK150 Harley-Davidson Applications
| These tweeter kits are designed to be mounted in the small 2" guage holes of both Batwing and Sharknose fairings. The tweeters can be connected to most stock, aftermarket, or amplified sources. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
1998-2013 |
1996-2013 |
| FLHX |
FLTR, FLTRSE |
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| Note: 1996-1997 requires adapter harness WHA9697. |
| These tweeter kits are designed to be mounted on Batwing fairings. Not for use on Sharknose fairings. The tweeters can be connected to most stock, aftermarket, or amplified sources. |
| Street Glide |
Road Glide |
Electra Glide |
| 2006-2013 |
- |
1996-2013 |
| FLHX |
|
FLHT, FLHTC, FLHTCU, FLHTCSE, FLHTCUSE |
| These tweeter grills are designed for 5.25" speaker openings in Sharknose fairings. Not for use on Batwing fairings or Tour-Pak speaker pods. The tweeters can be connected to most stock, aftermarket, or amplified sources. |
| Street Glide |
Road Glide |
Electra Glide |
| - |
1998-2013 |
- |
| |
FLTR, FLTRSE |
|
|
 Acrobat™ File (PDF)
 Bitmap File (JPG) |
|
| If you can't find what you're looking for, let us know and we'll do what we can. |
|
|
|
|
Home 
Login/Register 
Checkout/Cart 
Shopping Cart
0 items
Gallery
Technical
Fitment Guides
