Systems – Hawg Wired https://hawg-wired.com HIGH PERFORMANCE, AMERICAN MADE AUDIO EQUIPMENT Fri, 13 Mar 2026 00:27:02 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://hawg-wired.com/wp-content/uploads/2025/05/hwlogo-400x300-wht-100x100.gif Systems – Hawg Wired https://hawg-wired.com 32 32 RSX/NX – RUSH4002 https://hawg-wired.com/shop-2/systems/14-23/rsx-nx-rush4002/ https://hawg-wired.com/shop-2/systems/14-23/rsx-nx-rush4002/#respond Fri, 12 Sep 2025 05:23:53 +0000 https://hawg-wired.com/?post_type=product&p=2015

The RUSH4002 System is a complete plug and play kit for the 2014+ Rushmore platform that includes our latest reliable and performance-proven RSX400, 400-watt amplifier, NX652-150 6.5″ component speakers and a universal mounting bracket for 2014+ Batwing or Sharknose fairings. The RSX400 included in the system has a built-in pre-filter that corrects the factory curve for optimal performance so that flashing is not required. If your radio has been flashed our 2x gain mode will accommodate low input voltages as well.

NX652-150 Component Speakers:
6.5-inch carbon fiber cone
38mm Ferrofluid cooled voice coil assembly
Spider-less suspension design

RS400 Amplifier:
400-watt RMS, Class-D power amplifier. Efficient power, low heat.
Conformal coated to protect against corrosion and moisture.

WX400 Amplifier Install Kit:
Everything you need to wire up the system. Professionally terminated for Plug-N-Play installations.

]]> https://hawg-wired.com/shop-2/systems/14-23/rsx-nx-rush4002/feed/ 0 RS/NX – Six Pack https://hawg-wired.com/shop-2/systems/98-13/rs-nx-six-pack/ https://hawg-wired.com/shop-2/systems/98-13/rs-nx-six-pack/#respond Fri, 12 Sep 2025 04:55:44 +0000 https://hawg-wired.com/?post_type=product&p=2017

The SIX PACK has been chiseled into perfection over the years and is the perfect solution for someone who wants all the performance they can get now and possibly add more later. Comprised of a set of our USA built NX speakers and our 400-watt reference series amplifier.  Reference Series amplifiers are 2 Ohm stable and compact enough to fit two or more in most fairings.

NX652-150 Component Speakers:
6.5-inch carbon fiber cone
38mm Ferrofluid cooled voice coil assembly
Spider-less suspension design

RS400 Amplifier:
Class-D power amplifier, efficient power, low heat
Conformal coated to protect against corrosion and moisture

AR65 Speaker Adapter Rings:
Completely bolt-in with no modifications required
All hardware included

WX400 Amplifier Install Kit:
Everything you need to wire up the system. Pre-terminated and plug-in ready.

]]> https://hawg-wired.com/shop-2/systems/98-13/rs-nx-six-pack/feed/ 0 DCS4004 System w/DCM2 (DSP+Bluetooth) https://hawg-wired.com/shop-2/systems/23-5-25/dcs4004/ https://hawg-wired.com/shop-2/systems/23-5-25/dcs4004/#respond Sat, 28 Jun 2025 09:30:13 +0000 https://hawg-wired.com/?post_type=product&p=1422

Clean, clear, loud, expandable front system that fits both fairings and can be installed in quick time with only the fairing removed. Complete with our oil-cooled, carbon fiber component speakers and backed with an RS 400-watt digital amp, the DCS4004 is a true plug-n-play, no battery wire installation that cranks. Using the DCM2 Bandit Box re-purposes the A2B board that’s already on your bike, saving money while freeing up space. The DCM2 is curve corrected and optimized through an onboard DSP while also being bluetooth ready for user configuration via mobile app (available soon).

NX652-150 Component Speakers:
6.5-inch carbon fiber cone
38mm Ferrofluid cooled voice coil assembly
Spider-less suspension design

DCM2 (Bandit Box):
100% Plug and Play to 2024+ factory connector, no battery wires
Built-in DSP configured for 2024+ factory system
Rear speaker wire connector (high-level output to drive secondary amp)

RS400 Amplifier:
Class-D power amplifier, efficient power, low heat
Conformal coated to protect against corrosion and moisture

UAB150-24 Amplifier Bracket:
Completely bolt-in with no modifications required
All hardware included

How direct connect works

DCs4004 system
[ Harley Skyline Radio ]
│
A2B Board
(removed from stock amp)
│
[ DCM2 Bandit Box ]
├── 12V Power
├── Ground
├── Remote Out (turn-on)
└── 4ch Speaker-Level Outputs
          ├── ➤ Front Amp ➝ Front Speakers
          └── ➤ Rear Amp ➝ Rear/Saddlebag/TourpacSpeakers
DCs4002 system
[Harley Skyline Radio]
│
Stock amp stays (silver only)
│
[ DCM1 Direct Connect ]
├── 12V Power (harness, 30a)
├── Ground (harness)
└── 4ch Speaker-Level Outputs
          ├── ➤ Front Amp ➝ Front Speakers
          └── ➤ Rear Amp ➝ Rear/Saddlebag/TourpacSpeakers
]]> https://hawg-wired.com/shop-2/systems/23-5-25/dcs4004/feed/ 0 DCS4002 System w/DCM1 https://hawg-wired.com/shop-2/systems/23-5-25/dcs4002-direct-connect-system/ https://hawg-wired.com/shop-2/systems/23-5-25/dcs4002-direct-connect-system/#respond Sat, 17 May 2025 06:38:23 +0000 https://hawg-wired.com/product/dcs4002-direct-connect-system/

The DCS4002 system consists of four key components making it the only truly plug-n-play, no power wire required installation available. Comprised of our USA made Reference Series ferrofluid speakers, DCM1 DSP module, an RS400 400-Watt Class-D amplifier and an application specific bracket, this system is everything needed for a clean, plug-n-play, high-powered, easy to install audio upgrade for your 24′ Road Glide

NX652-150 Component Speakers:
6.5-inch carbon fiber cone
38mm Ferrofluid cooled voice coil assembly
Spider-less suspension design

DCM1 Direct Connect Module:
100% Plug and Play to 2024+ factory connector, no battery wires
Built-in DSP configured for 2024+ factory system
Rear speaker wire connector (high-level output to drive secondary amp)

RS400 Amplifier:
Class-D power amplifier, efficient power, low heat
Conformal coated to protect against corrosion and moisture

AB150-24S Amplifier Bracket:
Completely bolt-in with no modifications required
All hardware included

This system is not compatible with CVO amplifiers (BLACK)

Installation Guide

How direct connect works

DCs4004 system
[ Harley Skyline Radio ]
│
A2B Board
(removed from stock amp)
│
[ DCM2 Bandit Box ]
├── 12V Power
├── Ground
├── Remote Out (turn-on)
└── 4ch Speaker-Level Outputs
          ├── ➤ Front Amp ➝ Front Speakers
          └── ➤ Rear Amp ➝ Rear/Saddlebag/TourpacSpeakers
DCs4002 system
[Harley Skyline Radio]
│
Stock amp stays (silver only)
│
[ DCM1 Direct Connect ]
├── 12V Power (harness, 30a)
├── Ground (harness)
└── 4ch Speaker-Level Outputs
          ├── ➤ Front Amp ➝ Front Speakers
          └── ➤ Rear Amp ➝ Rear/Saddlebag/TourpacSpeakers
]]> https://hawg-wired.com/shop-2/systems/23-5-25/dcs4002-direct-connect-system/feed/ 0