Peripherals – Hawg Wired https://hawg-wired.com HIGH PERFORMANCE, AMERICAN MADE AUDIO EQUIPMENT Wed, 01 Apr 2026 23:53:53 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://hawg-wired.com/wp-content/uploads/2025/05/hwlogo-400x300-wht-100x100.gif Peripherals – Hawg Wired https://hawg-wired.com 32 32 DCM1 Direct Connect Module (Non-A2B) https://hawg-wired.com/shop-2/products/peripherals/dcm1-direct-connect-module-non-a2b/ https://hawg-wired.com/shop-2/products/peripherals/dcm1-direct-connect-module-non-a2b/#respond Sat, 17 May 2025 06:38:58 +0000 https://hawg-wired.com/product/dcm1-direct-connect-module-non-a2b/

The DCM1 for 2024+ (non-CVO) Harley audio systems offer a true plug and play solution for your audio upgrade. No need for power and ground wires, line converters, resistors or cutting into your bike. The DCM1 plugs directly into the OE harness keeping your stock system in full operating state while passing through necessary A2B signals and power. The DCM1 senses current draw at the factory amp to enable system power. With an on-board pre-programmed DSP, tuned specifically to optimize power and sound quality for 2024+ bikes, and a 6-watt Class-D amplifier for high-level output, the DCM1 makes the installation of a high-powered system easy and clean. The DCM1 is Patent Pending.

Product highlights:
-100% Plug and Play to 2024+ factory connector (non-CVO)
-Current sensing power-on detection, no remote wire required
-Pre-tuned for curve correction and optimization on 2024+ Skyline radios
-2-Ch, 6-Watt, Class-D, high level speaker outputs for connection to amplifiers

Other Features:
-12v power and ground terminals for Direct Connection of amplifiers. Circuit limited, 35 Amp, Fused
-Factory connections eliminate need for extra wires or terminations
-Rear speaker wire connector (high-level output to drive secondary amp)
-System status and clipping LED for quick and proper setup
Dimensions: 4″x2.5″x1.5″,  6″ harness
Warranty: 1 year

What’s in the box:
1x DCM1 Module
1x 4-pin Mini-Fit input cables
Installation Guide
Mounting Hook/Loop pad
Owner’s manual

 
 
Compatible Years
Removes OE Amplifier
A2B Interface
HD Curve Correction
Discrete Channels
Fade Control
Addt'l Adjustable Parameters
Bluetooth
DSP
PWR/GND Pass-through
Remote turn-on out
Status/Clipping Indicator
Dimensions
Warranty
DCM1
2024-2025(Non-CVO)
No
Pass-through
Yes
2
Radio Controlled
N/A
No
Pre-Tuned/Fixed
Yes
No
Yes
4″x2.5″x1″
1yr
DCM2
23.5-2025(ALL)
Yes
Bandit*
Yes
4
Application Controlled**
Yes**
Yes
Pre-Tuned/Custom
Yes (w/ dedicated fuse 30A)
Yes (300mA)***
Yes
4″x2.5″x1.5″
1yr

* DCM2 repurposes the A2B interface board removed from the OE amplifier (Black or Silver, CVO or Std)
** DCM2 application required, features subject to change 
*** Use to trigger amplifer(s) that require REM turn on or relays for larger current drawing devices

How direct connect works

DCs4004 system
[Harley Skyline Radio]
│
A2B Board
(removed from stock amp (black or silver)
│
[DCM2 Direct connect-Bandit Box]
├── 12V Power (harness, 30a)
├── Ground (harness)
├── Remote Out (Optional turn-on)
├── Application (DSP & Config)
└── 4ch Speaker-Level Outputs
       CH1,2  ├── ➤ Front Amp ➝ Front Speakers
       ch3,4  └── ➤ Rear Amp ➝ Rear/Saddlebag/Tour Pak Speakers

DCs4002 system
[Harley Skyline Radio]
│
Stock amp stays (silver only)
│
[DCM1 Direct Connect]
├── 12V Power (harness, 30a)
├── Ground (harness)
└── 2ch Speaker-Level Outputs
       CH1,2  ├── ➤ Front Amp ➝ Front Speakers
       ch1,2  └── ➤ Rear Amp ➝ Rear/Saddlebag/Tour Pak Speakers

]]> https://hawg-wired.com/shop-2/products/peripherals/dcm1-direct-connect-module-non-a2b/feed/ 0 DCM2 w/DSP+Bluetooth (Bandit Box) https://hawg-wired.com/shop-2/products/peripherals/dcm2-w-dspbluetooth-bandit-box/ https://hawg-wired.com/shop-2/products/peripherals/dcm2-w-dspbluetooth-bandit-box/#respond Sat, 17 May 2025 06:38:53 +0000 https://hawg-wired.com/product/dcm2-w-dspbluetooth-bandit-box/

Our DCM2, aka the Bandit Box, for 23.5+Harley audio systems is here. Transfer your factory amplifiers A2B board over to the DCM2, save some cash and install your choice of amplifiers and speakers while not interfering or changing a single thing about your bikes infotainment system. Get out of the box high-fidelity sound with added built-in DSP and Bluetooth connectivity allowing end user system control and tuning.

Product highlights:
-100% Plug and Play to 23.5+ factory connector
-Removes factory amplifier 
-Repurposes factory A2B board for undetected and seamless integration
-Pre-tuned for curve correction and optimization on 23.5+ Skyline radios
-Works on BOTH standard and CVO applications
-4-Ch, 6-Watt, Class-D, high level speaker outputs for connection to amplifiers
-Digital signal processing via iSO and Android (App coming soon)
-13-band graphic EQ on front and rear channels +more

Other Features:
-12v power and ground terminals for Direct Connection of amplifiers. Circuit limited, 35 Amp, Fused
-12v remote terminal for turning on amplifiers or other devices (300ma Max)
-Factory connections eliminate need for extra wires or terminations
-System status and clipping LED for quick and proper setup
Dimensions: 4″x2.5″x1.5″
Warranty: 1 year

What’s in the box:
1x DCM2 Module
2x 4-pin Mini-Fit input cables
Installation Guide
Tool/Hardware kit
Mounting Hook/Loop pad
Owner’s manual

 
Compatible Years
Removes OE Amplifier
A2B Interface
HD Curve Correction
Discrete Channels
Fade Control
Addt'l Adjustable Parameters
Bluetooth
DSP
PWR/GND Pass-through
Remote turn-on out
Status/Clipping Indicator
Dimensions
Warranty
DCM1
2024-2025(Non-CVO)
No
Pass-through
Yes
2
Radio Controlled
N/A
No
Pre-Tuned/Fixed
Yes
No
Yes
4″x2.5″x1″
1yr
DCM2
23.5-2025(ALL)
Yes
Bandit*
Yes
4
Application Controlled**
Yes**
Yes
Pre-Tuned/Custom
Yes (w/ dedicated fuse 30A)
Yes (300mA)***
Yes
4″x2.5″x1.5″
1yr

* DCM2 repurposes the A2B interface board removed from the OE amplifier (Black or Silver, CVO or Std)
** DCM2 application required, features subject to change 
*** Use to trigger amplifer(s) that require REM turn on or relays for larger current drawing devices

How direct connect works

DCs4004 system
[Harley Skyline Radio]
│
A2B Board
(removed from stock amp (black or silver)
│
[DCM2 Direct connect-Bandit Box]
├── 12V Power (harness, 30a)
├── Ground (harness)
├── Remote Out (Optional turn-on)
├── Application (DSP & Config)
└── 4ch Speaker-Level Outputs
       CH1,2  ├── ➤ Front Amp ➝ Front Speakers
       ch3,4  └── ➤ Rear Amp ➝ Rear/Saddlebag/Tour Pak Speakers

DCs4002 system
[Harley Skyline Radio]
│
Stock amp stays (silver only)
│
[DCM1 Direct Connect]
├── 12V Power (harness, 30a)
├── Ground (harness)
└── 2ch Speaker-Level Outputs
       CH1,2  ├── ➤ Front Amp ➝ Front Speakers
       ch1,2  └── ➤ Rear Amp ➝ Rear/Saddlebag/Tour Pak Speakers

]]> https://hawg-wired.com/shop-2/products/peripherals/dcm2-w-dspbluetooth-bandit-box/feed/ 0 HUA360 Din Radio Adapter https://hawg-wired.com/shop-2/products/peripherals/hua360-din-radio-adapter/ https://hawg-wired.com/shop-2/products/peripherals/hua360-din-radio-adapter/#respond Sat, 17 May 2025 06:38:44 +0000 https://hawg-wired.com/product/hua360-din-radio-adapter/

Want the features of a DIN radio without losing your hand controls on your 98-2012 FLHT/FLTR? Our HUA360 Adapter allows you to plug and play your choice of supported radios (steering wheel controls interface) directly into your stock wiring harness without giving up your hand control functions. No programming, no messing around with resistor networks, just plug your stock audio harness into one side, terminate your radio’s harness into the other, and you’re wired.

Product highlights:
-Supports Sony, Pioneer, Alpine, Kenwood, JVC, and Clarion
-Integrated H-D audio harness connector
-Wired remote / steering wheel interface connectors
-Fast response time through hand controls
-Utilizes many aftermarket radio features
-Fully enclosed durable plastic and epoxy resin

What’s in the box:
1x HUA360 Adapter
1x Terminal plug
1x Control cable (use when required)
Mounting Hook/Loop pad
Installation Guide

]]> https://hawg-wired.com/shop-2/products/peripherals/hua360-din-radio-adapter/feed/ 0